75 SQ. FT. FLOOR HEAT MAT SYSTEM 120V

75 SQUARE FOOT MAT SYSTEM WITH THERMOSTAT, 120V

(No reviews yet) Write a Review

Availability:

1 to 2 business days

Shipping:

Calculated at Checkout

COVERAGE AREA:

75 SQ. FT.

VOLTAGE:

120 VOLTS

TOTAL SIZE OF MAT SYSTEM:

20" WIDE X 45' LONG

THIS SYSTEM CONSISTS OF:

1 MAT, THERMOSTAT & SENSOR WIRE

TOTAL AMPS:

7.5

TOTAL WATTS:

900

HEAT OUTPUT:

12 WATTS/ SQ. FT.

OHM RANGE:

12-21

COLD LEAD:

10 FT.

CABLE THICKNESS:

1/8"

CABLE SPACING IN MAT:

UL LISTED FOR U.S. AND CANADA:

UL 1673, FILE #E310385

TYPE OF FLOOR USE:

TILE, SLATE, STONE, TREATED CEMENT, LAMINATE FLOOR, ENGINEERED WOOD, AND CARPET. FLOORING SHOULD NOT BE THICKER THAN 1.25".

MADE IN THE USA:

MANUFACTURED IN SPRING GROVE, IL

WHAT'S INCLUDED:

MAT HEATING SYSTEM, THERMOSTAT, SENSOR WIRE, INSTALLATION MONITOR, 2 MOUNTING SCREWS, & INSTRUCTION MANUAL

THERMOSTAT DETAILS:

SEE THERMOSTAT PAGE

$504.00

Description

Mat System The mat electric floor heating system consists of a mat with the cable heating elements pre-spaced 3" within the mat. Simply unroll the floor heating mat with the cold lead running up the wall to the electrical box. These heating systems are ideal for rectangular or square areas with right angles. You can manipulate the mat to fit the desired heating area by using the turning techniques as shown on page 6 in the installation manual. The white fiberglass mesh may be cut to flip and turn the mat. The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating. For assistance please see Tips for Choosing the Right Size System. This system must be completely embedded in a self-leveling mortar 1/4" to 1/2" thick. Use only polymer modified cement based mortars. The heating system should be installed on concrete or concrete backer board.

THIS SYSTEM ALSO INCLUDES A THERMOSTAT OF YOUR CHOICE (PLEASE MAKE SELECTION ABOVE)

For more information on the thermostats we offer click from the options below.